manualshive.com logo in svg

Sharp FO-2600, Operation Manual

Share
Download
Sharp FO-2600 Operation Manual Download Page 39

Optional transmission settings

If desired, there are several transmission settings which you can make before dialling
and transmitting the document.

Note:

To make the settings, the document must first be loaded in the feeder.

Resolution

Your fax has 4 resolution settings:

STANDARD:

Use STANDARD for ordinary documents. This setting
gives you the fastest and most economical transmission.

FINE:

Use FINE for improved reproduction, especially with docu-
ments containing small letters or fine drawings.

SUPER FINE: 

Use SUPER FINE when you need the highest quality of
reproduction.

HALF TONE:

Use HALF TONE for photographs and illustrations. The
original will be reproduced in 32 shades of grey.

If you do not make a setting, the fax will automatically send the document in
STANDARD.

♦

In order to transmit with FINE or SUPER FINE resolution, the receiving fax machine
must also have that resolution. If it doesn’t, the next best available setting will be
used.

♦

The default resolution (the resolution the fax uses if you do not make a resolution
setting) can be changed to FINE by changing Option Setting 1. See Chapter 6,
"Optional Settings".

Contrast

The contrast is normally set to AUTO, which means that the fax automatically controls
the contrast, but for faint documents you can change the setting to DARK.

Setting the resolution and contrast

Press the RESOLUTION key one or
more times until the desired
resolution and contrast settings
appear in the display.

••

The first time you move through the list
of resolution settings, the contrast
setting AUTO will appear next to each
resolution setting. The second time you
move through the list, the contrast
setting DARK will appear.

PAPER

CHECK

BROADCAST

MEMORY

RESOLUTION

SENDING DOCUMENTS

BASIC OPERATIONS

3-3

Summary of Contents for FO-2600










































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands