33
EN
Recording
Disc Playback
Editing
Before you start
Connections
Getting started
Changing the
Setup menu
Others
Timer Recording (cont’d)
Recording
If the starting time is same:
• The timer programming set first (PROG. 1) has
priority.
PROG. 1
PROG. 2
Actual
recording
PROG. 2
Additional 30 seconds (at the most) are cut off.
PROG. 1
PROG. 2 recording will start after PROG. 1 recording
is completed.
If programming has been made at the end of
the programming (PROG. 1) currently being
recorded:
• The timer programming set first (PROG. 2) has
priority. PROG. 3 will not be recorded.
PROG. 1
PROG. 2
Actual
recording
PROG. 1
PROG. 2
PROG. 3
Additional 30 seconds (at the most) are cut off.
PROG. 2 recording will start after PROG. 1 recording
is completed.
If the recording time is partially overlapped:
• The timer programming with the earlier start
time (PROG. 2) has priority. PROG. 1 will start after
PROG. 2 recording is completed.
PROG. 1
PROG. 2
Actual
recording
PROG. 2
PROG. 1
Additional 30 seconds (at the most) are cut off.
If the recording time entirely overlaps:
• The shorter timer programming (PROG. 1) is not
recorded.
PROG. 1
PROG. 2
Actual
recording
PROG. 2
Hints for Timer Recording
• If there is a power failure or the unit is unplugged for more than 1 hour, the clock setting and all timer
settings will be lost.
• If there is no disc or an unrecordable disc in the tray, the
icon will flash and timer recording will not
occur. Insert a recordable disc.
• When all timer recordings are completed, the
icon flashes. To play back or eject the recorded disc,
press
[ OPERATE]
, and then press
[PLAY
B
]
or
[OPEN/CLOSE
A
]
.
• During timer recording or timer-standby mode (
icon appears on the front panel display), no
operations on the unit are available. To make operations available, cancel the timer recording or timer-
standby mode (
icon disappears).
• To cancel the timer-standby mode, press
[ OPERATE]
.
• If the Start and End times are same, the length of the recording will be set for 24 hours. If the disc
becomes full during recording, the unit will turn itself off.
• If two or more programmes overlap, “Overlap” and the overlapped programme number will appear on
the display.
• If the Start time is earlier and the End time is later than the current time, the recording will start
immediately after you turn the power off.
Priority of overlapped settings
The unit records programmes according to priority if the timer programmes overlap.
Note for DVD recording
• If the recording time of two programmes overlap, or the End time of a programme and the Start time of
another is same, the first 30 seconds (at the most) of the subsequent programme are cut off.
If the End time of the programme currently being
recorded and the Start time of the subsequent pro-
gramme are same:
• If PROG. 1 is a DVD recorded programme, the
beginning of PROG. 2 may be cut off.
* If the cut off time exceeds 1 minute, the error number
“E40” will appear in the Timer Programming list.
PROG. 1
PROG. 2
Actual
recording
The first 30 seconds (at the most) are cut off.*
PROG. 2
PROG. 1