12
(11) Engage the PF roller assembly, PF latch and PF latch
2 with PF clutch spring and PF clutch spring 2,
respectively.
Note:
There are protrusions at both ends of the
PF clutch springs. Match these to the slits
on the PF roller assembly and the PF latch.
Protrusion
Protrusion
Slit
PF roller assembly
PF clutch spring
(PF clutch spring 2)
PF latch
(PF latch 2)
Slit
Journal side
PF roller assembly
Apply Mobile 1
PF clutch spring
(Apply Moly LG-S No. 1
to outer circumference)
PF clutch spring 2
(Apply Moly LG-S No. 1
to outer circumference)
Receipt side
PF latch 2
PF latch
5mm
5mm
Apply Mobile 1
10mm
5mm
10mm
5mm
(12) Insert the PF shaft assembly into the PF housing
and apply ORELUBE G-1/3 to the left and right
fixing lever (L)and (R).
Note:
When mounting the PF shaft assembly,
match the PF roller assembly and PF latch
position to the platen width of the PF
housing.
Apply ORELUBE G-1/3
Rear
Apply ORELUBE G-1/3
PF shaft assembly
Platen
PF housing
(10) Mount the PF latch 2 onto PF shaft from the receipt
side, and the PF roller assembly from the journal side.
