background image

Number

Program Name

Soft SW

setup

Function

Note

138

IMAGE MEM. PRINT
(LINE ERROR) SETTING

SW1-7

Set to control whether to print the first part of the original on the
transaction report when there is an error.

139

AUTO LISTING SETTING

SW19-7 

 8,

SW47-1 

 5,

SW48-1 

 6,

SW49-1 

 5,

SW50-1 

  6

Set to have a listing of fax activity automatically printed at a certain time.

140

PRINT STATION # IN
RCVD DATA SETTING

SW30-7

Set to choose where to print the date, your name, and your fax number on
faxes you send.

141

PAGE COUNTER PRINT
SETTING

SW33-1

Set to print page numbers on faxes you send.

142

INDEX PRINT

SW32-6

Set to print an index mark on the top of received faxes.

143

DATE AND TIME SETTING

No soft SW

Use to set the date and time of the internal clock.

144

DAYLIGHT SAVING TIME
SETTING

SW46-5

Set the fax machine to automatically make time changes during the year.

151

RES. PRIORITY SETTING

SW1-1 

  2

Set to select the resolution of transmitted faxes (for example, STANDARD,
FINE, SUPER FINE, ULTRA FINE).

152

SEND MODE

SW8-1

Set to choose whether direct mode or memory sending mode is the default
in the initial state.

153

EXPOSURE SETTING

SW3-1 

  5

Set to select the exposure of transmitted faxes (for example, LIGHT,
MEDIUM, DARK).

161

OPTIONAL SETTING LIST
PRINT

No soft SW

Set to choose whether to print a list of settings made in user programs.

2. How to use user programs

You cannot change user programs during a fax transmission or recep-
tion.
1) Select fax mode.

If the copier mode indicator is lit, press the COPY/FAX key.

2) Press and hold the light (    ) key for more than 5 seconds.

The following message is displayed.

3) Enter the desired user program number (3-digit) using the numeric

keys, then press the START key.

The user program number and name are displayed.
Instead of entering the user program number, you can also press
the left arrow key (    ) or right arrow key (    ) to select the user
program.

Canceling: If you make a mistake entering the user program num-

ber, press the CLEAR key and enter the number again.

4) Follow the instructions that start on the next page for specific infor-

mation about setting user programs.

Canceling: When setting using programs, if you make a mistake

entering a number or time using the numeric keys, open
the rapid key overlay, press the CLEAR key, and enter
the numbers again.
When setting user programs, the current settings and
options are shown on the display panel.

When you want to exit from the middle of a user program, press the
light (    ) key.
When changing between screens, use the arrow keys as follows.

5) When you are finished setting user programs, press the light (    )

key.

USER PROGRAM
ENTER PRG.     #=

DIAL MODE
2:PULSE

DIAL MODE
1:TONE

Example: P102 DIAL MODE SETTING

Press the left 
arrow key  (     )

Press the right 
arrow key  (     )

Example: P102 DIAL MODE SETTING

Press the left 
arrow key  (     )

Press the right 
arrow key  (     )

DM-FX1

7  –  2

Summary of Contents for DM-FX1



























































Reviews: