Sharp AR-FX7 Service Manual Download

Page: 9 / 104

AR-FX7 INSTALLATION PROCEDURE 3 - 1

[3] INSTALLATION PROCEDURE

1. Install of expansion kit

A. Parts included

B. Installation procedure

Turn off the main switch of the copier and then remove the
power plug of the copier from the outlet.

1) Remove the shielding plate and the left rear cabinet.

Remove the five screws that fix the shielding plate and then
remove the shielding plate by inserting a flat-blade screwdriver.

Then, remove the two screws that secure the left rear cabinet and
slide the cabinet toward the rear side of the main unit to remove it.

2) Work the left rear cabinet.

Cut and remove the cut-out portion from the left rear cabinet using
a tool such as nippers.

Be careful about the direction of the tool so that the cut surface is
flat.

3) Attach the speaker.

Attach the speaker to the left rear cabinet using supplied two
golden screws (M3).

4) Attach the fax PWB

Mount the two spacers on the fax PWB.

Then, insert the connector of the FAX PWB to the connector of the
FAX expansion PWB and secure it using six M3 screws with
washer.

PWB spacers: 2 pcs.

Fax PWB: 1 pc.

TEL/LIU PWB: 1 pc.

Speaker unit:

1pc.

Fax connector cover:

1 pc.

Line cable: 1 pc.

M3 golden screws:

2 pcs.

M3 screws with

washer: 8 pcs.

Supplied label:

1 sheet (For SUK)

Installation manual:

1 sheet

Operation manuals:

1 pc.

Quick reference

booklet: 1pc.

(For SEN, SEB)

Line adapter: 1 pc.

(For SUK, SEB,

SEES, SEZ)

Shielding plate

Screws

Left rear cabinet

Cut-out portion

M3 golden screws

M3 Screws with washer

Fax PWB

Spacers

Summary of Contents for AR-FX7









































































































Search results

Summary of Contents for AR-FX7

Reviews:

Related manuals for AR-FX7

Brands by name

Popular brands

Sharp AR-FX7, Service Manual

Search results

Summary of Contents for AR-FX7

Reviews:

Related manuals for AR-FX7

Brands by name

Popular brands