Sharp Aquos Xx2, User Manual

Page: 10 / 194

8
Inserting USIM Card
Always power off beforehand.
Open Card Slot Cover
・Use notch (○) to pull Card Slot Cover toward you as shown
( ), then rotate it in the direction of the arrow ( ).
Pull out USIM Tray
・Do not pull USIM Tray forcefully or at an angle; damage may
result. Gently pull it out horizontally from the edge.
Place USIM Card in USIM Tray
・Check orientation of USIM Card (see notch), then gently
place it with IC chip (metal) facing up.
Insert USIM Tray into USIM Card Slot (right opening)
・Check orientation of USIM Tray, then gently insert it all the
way horizontally.
Close Card Slot Cover
・Lift Card Slot Cover in the direction of
and reinsert
hinge as shown ( ); place Card Slot Cover over the slot so
that there is no gap between handset and Card Slot Cover,
then push it in the direction of the arrow (
) to close.
・When closing Card Slot Cover, push it firmly all the way
from ○ area to hinge as shown ( ).