165
Handset Settings
5
Enter other items required by network operators
▶
[
]
▶
[Save]
z
Never set the MCC to a figure other than 440 or the MNC to
a figure other than 10. Otherwise the added access point
disappears from the screen.
z
If the settings of MCC and MNC are changed and the added
access point disappears from the screen, reset the settings or
set the access point manually.
Resetting an access point
Reset the access point settings to the default state.
1
In the home screen, select “apps folder”
▶
[Settings]
▶
[Network & Internet]
▶
[Mobile
network]
▶
[Advanced]
▶
[Access Point Names]
2
[
]
▶
[Reset to default]
z
When sp-mode is not subscribed or if you fail to make
automatic setting of an access point due to signal status such
as outside the service area, you are required to set the access
point again manually.
Data usage
You can check the data usage volume via mobile networks or
Wi-Fi networks. Also, you can set limit.
1
In the home screen, select “apps folder”
▶
[Settings]
▶
[Network & Internet]
▶
[Data usage]
z
The data communication volume via mobile networks is
displayed.
2
Select an item
Data Saver
: Suppress the data usage volume by pausing
data transmission in the background of some apps.
y
For apps whose data communication is not restricted even
during Data Saver, you can set it from [Unrestricted data].
Mobile data
: Set whether to use the data communication via
mobile networks.
App data usage
: Display the data usage volume via mobile
networks on a diagram. Also, you can check apps having
used data communication.
Summary of Contents for AQUOS R3 SH-04L
Page 1: ...INSTRUCTION MANUAL SH 04L ...
