Sharp AL-1611 Operation Manual Download Page 8

Page: 8 / 80

GETTING ST

TED

Operation

panel

PART NAMES AND FUNCTIONS

INTERRUPT key and indicator

(p. 30)

Interrupts a copy run.

Copy quantity display

Displays the specified copy quantity during the ready
condition and displays the copy countdown as copies
are made. Also see items

and

ZOOM indicator

(p. 22)

Lights up when a zoom ratio is set.

Copy ratio display (

) key

(p. 22)

Press and hold down during standby to display the copy
ratio in the copy quantity display.

Zoom keys

(p. 22)

Use to select any reduction or enlargement copy ratio
from 50% to 200% in 1% increments.

PAPER SIZE ENTER key

(p. 15)

Use to set the paper size in a paper tray.

AUDIT CLEAR key

(p. 16)

Closes an open account.

PAPER SIZE indicators

Light up to show the selected copy paper size.

Alarm indicators

: TD cartridge replacement required indicator

(p. 33)

: Drum replacement required indicator (p. 36)
: Paper required indicator (p. 13)
: Misfeed indicator (p. 39)

POWER SAVE indicator

(p. 52)

Lights up when the copier is in a preheat mode.

SPF indicator

(AL-1622 only)

(p. 19)

Lights up when originals are set in the SPF.

Output tray full indicator

Indicates copies must be removed from the paper output
tray.

B/W REVERSE key and indicator

(p. 28)

Press to reverse the black and white areas.

XY-ZOOM key and indicator

(p. 26)

Press to change the horizontal and vertical copy ratios
independently.

AUTO/MANUAL/PHOTO key and indicators

(p. 17)

Use to sequentially select the exposure modes: AUTO,
MANUAL, or PHOTO.

Light and dark keys and indicators

(p. 18)

Use to adjust the MANUAL or PHOTO exposure level.

Numeric keys

Use to select the desired copy quantity or to make user
program entries.

GETTING ST

TED

t names and functions

Not used

Summary of Contents for AL-1611

















































































Search results

Summary of Contents for AL-1611

Reviews:

Related manuals for AL-1611

Brands by name

Popular brands

Sharp AL-1611, Operation Manual

Search results

Summary of Contents for AL-1611

Reviews:

Related manuals for AL-1611

Brands by name

Popular brands