13
GETTING ST
AR
TED
LOADING COPY PAPER
To save space, this copier has been designed with one (AL-1611) or two
(AL-1622) adjustable front-loading trays, which are easily opened for paper
loading. For best results, use only SHARP recommended paper. (See page 59.)
The paper required (
) indicator will light up when there is no copy paper in
the selected paper feed station, or when the paper tray is not installed or is
improperly installed.
When the paper size is changed in the paper tray, the size of
the paper must be entered by steps 8 through 11 on page
15. If not, the edges of copies may become smudged with
toner. Also, the AUTO PAPER SELECT (AL-1622 only) and
the AUTO IMAGE features will not function properly.
1
Gently lift and pull out the paper tray until it stops.
2
Push the pressure plate down until it locks in place.
3
Fan the copy paper and insert it into the tray. Make sure
the edges go under the corner hooks.
●
If you change to a different size of copy paper, the tray must be
adjusted. See the next page.
●
Set the paper along the guides.
●
The tray holds up to 250 sheets of paper.
Do not load paper above the maximum height line.
4
Push the paper tray firmly back into the copier.
Loading cop
y paper
Maximum height line
Summary of Contents for AL-1611
Page 76: ...MEMO ...
Page 77: ...MEMO ...
