Sharp AL-1611, Operation Manual

Page: 61 / 80

59
GENERAL INFORMA
TION
SUPPLIES
Types and sizes of copy paper
Size Weight Capacity (80 g /m 2 Special paper
paper)
Paper tray A5* to A3 56 to 80 g/m 2 250 sheets
Bypass tray Ordinary paper: 56 to 128 g/m
2
** 100 sheets Transparency film,
A6 to A3 (Ordinary paper) labels, envelopes***
Envelopes:
International DL
(110 x 220 mm)
International C5
(162 x 229 mm)
Commercial 10
(104.78 x 241.3 mm)
* A5 copy paper cannot be used in the lower paper tray of AL-1622.
** For paper weighing from 105 to 128 g/m
2
, A4 is the maximum size that
can be fed through the bypass tray.
*** Do not use envelopes that have metal clasps, plastic snappers, string
closures, windows, linings, self-adhesive patches or synthetic materials.
These will cause physical damage to the copier.
●
For best results, use only paper recommended by SHARP.
● Special papers except envelopes must be fed one sheet at a time through
the bypass tray. Up to 10 envelopes can be set at one time.
Supplies
Supply part numbers
When ordering supplies, please use the correct part numbers as listed below.
Be sure to use only genuine SHARP parts and supplies.
Supply list
Supply Part number Usable life
TD cartridge AL-161TD Approx. 9,000 sheets*
Drum cartridge AL-160DR Approx. 30,000 sheets
* Based on copying onto A4 size paper at 5% toned area
(The life of the TD cartridge which has been included in the copier at the factory is
approximately 4,500 sheets.)