Sharp AL-1611 Operation Manual Download

Page: 17 / 80

GETTING ST

TED

Loading cop

y paper

LOADING COPY PAPER

To set the selected paper size, press the PAPER SIZE
ENTER key.

●

The selected paper feed location indicator will blink and the
corresponding paper size (which is currently set) indicator will light
up steadily. All other indicators except the START key indicator will
go out.

If copying is being performed, paper size setting
cannot be made .

AL-1622 only Use the TRAY SELECT key to select the
paper tray of which the paper size has been changed.

●

Each time the TRAY SELECT key is pressed, a paper tray will be
indicated with a blinking paper feed location indicator.

Use the ORIGINAL SIZE ENTER key to select the paper
size which is set in the paper tray.

●

Each time the ORIGINAL SIZE ENTER key is pressed, a paper size
will be indicated with a paper size indicator.

Press the START key and then the PAPER SIZE ENTER
key.

●

AL-1622 only

To change the paper size setting of the other tray,

repeat steps 9 to 10 after pressing the START key.

Summary of Contents for AL-1611

















































































Search results

Summary of Contents for AL-1611

Reviews:

Related manuals for AL-1611

Brands by name

Popular brands

Sharp AL-1611, Operation Manual

Search results

Summary of Contents for AL-1611

Reviews:

Related manuals for AL-1611

Brands by name

Popular brands