Sharp AL-1611, Operation Manual

Page: 23 / 80

21
MAKING COPIES
Reduction/enlargement/zoom
REDUCTION/ENLARGEMENT/ZOOM
Reduction and enlargement ratios can be selected either automatically with the AUTO IMAGE key or
manually with the PRESET RATIO selector (
, ) keys and/or the zoom ( , ) keys. The zoom
function enables precise copy ratio selection from 50% to 200% in 1% increments.
Automatic
1
Place the original on the original table or in the document
feeder tray.
●
If the original is placed in the document feeder tray, the ORIGINAL
SIZE indicator for the detected size will light up.
2
If the original is placed on the original table, press the
ORIGINAL SIZE ENTER key until the indicator for the
size of the original on the original table lights up.
●
This feature will not work when copy paper of non-standard size is
used or the bypass tray is used.
3
AL-1622 only Use the TRAY SELECT key to select the
paper tray with the desired paper size.
4
Press the AUTO IMAGE key.
●
The copy ratio will be automatically set.
●
If a PRESET RATIO indicator is blinking, part of the original image
may not be copied.
If the orientation of the original does not correspond to
standard reduction/enlargement ratios for the selected
paper tray, then the ORIGINAL SIZE indicator will
blink. Change the orientation of the original.
5
Set the number of copies.
6
Press the START key.
●
To cancel the automatic reduction/enlargement
mode, press the AUTO IMAGE key again.
●
When copying from the SPF with this feature, the
automatic reduction/enlargement mode will be
automatically cancelled after copying is complete.