Sharp AL-1611 Operation Manual Download | Manualshive

Page: 75 / 80

background image

73

MATERIAL SAFETY DATA SHEET

Date Revised: Jun.28. 2002
Date Issued: Oct.18.2001
MSDS NO. F-30841

13.DISPOSAL CONSIDERATION

Waste from residues

:

Waste material may be dumped or incinerated under conditions which meet

all federal, state and local environmental regulations.

Contaminated Packaging :

Waste may be disposed or incinerated under conditions which meet all
federal, state and local environmental regulations.

14.TRANSPORT INFORMATION

UN Classification: None
Not classified as hazardous for transport

15. REGULATORY INFORMATION

US Information

TSCA(Toxic Substances Control Act):

All chemical substances in this product comply with all applicable rules or order under TSCA.

SARA(Superfund Amendments and Reauthorization Act) Title III

302 Extreme Hazardous Substance: None
311/312 Hazard Classification: None

EU Information

1999/45/EC and 67/548/EEC

Symbol & Indication: Not required
R-Phrase: Not required

76/769/EEC : All chemical substances in this product comply with all applicable rules or order under

76/769/EEC.

16. OTHER INFORMATION

NFPA Rating (USA)

: Health=1

Flammability=1

Reactivity=0

WHMIS Legislation (Canada) : This product is not a controlled product.

References

IARC(1996) : IARC monographs on the Evaluation of the Carcinogenic Risk of Chemicals to Humans,

Vol. 65, Printing Process And Printing Inks, Carbon Black and Some Nitro Compounds,
Lyon, pp.149-261

H.Muhle, B.Bellmann, O.Creutzenberg, C.Dasenbrock, H.Ernst, R.Kilpper, J.C.MacKenzie, P.Morrow,
U.Mohr, S.Takenaka, and R.Mermelstein (1991) Pulmonary Response to Toner upon Chronic Inhalation
Exposure in Rats.
Fundamental and Applied Toxicology 17, pp.280-299.

The information on this data sheet represents our current data and best opinion as to the proper use in
handling of this product under normal conditions. However, all materials may present unknown hazards
and should be used with caution. Although certain hazards are described herein, we do not guarantee
that these are the only hazards which exist.

Page: 4/4

«
...
73
74
75
76
77
...
»

Summary of Contents for AL-1611

















































































Reviews:

No comments

Related manuals for AL-1611

Brand: Sagem Pages: 96

Brand: Olivetti Pages: 79

Brand: Canon Pages: 62

imageRUNNER 2545

Brand: Canon Pages: 116

Image Reader-A1

Brand: Canon Pages: 916

imageRUNNER ADVANCE

Brand: Canon Pages: 26

Brand: Canon Pages: 494

Brand: Fuji Xerox Pages: 3

Brand: Fuji Xerox Pages: 14

Document Centre 505

Brand: Fuji Xerox Pages: 69

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands