Sharp Actius PC-UM32W, Operation Manual

Page: 59 / 114

4-12
4
Disconnecting an External Monitor
1. Turn off the computer and the external monitor.
2. Loosen both screws of the display cable if it has, and remove the connector from
your external monitor.
3. Press the buttons on both sides of the connector of the parallel/VGA converter
cable and hold them; then, remove it from the computer.
Make sure to close the cover after you finish using the expansion port to
avoid being damaged.
Displaying on an External Monitor
To display the image on an external monitor, you may need to install the driver for
your external monitor. Before using the external monitor, refer to the manual
included with your external monitor.
Switching the Display
1. In the Display Properties dialog box, select Settings tab; then, click Advanced
button.
2. Select Intel® Graphics Technology tab; then, click Graphics Properties… .
3. Select the output display and click OK .
4. Click OK three times and close the Control Panel window.
•
You can also switch the display with Fn + F5 .
•
When you log on the computer as a member of the Limited group, you
cannot switch the display with the dialog box. Use
Fn+F5 keys.
•
While playing video or animation, you may not be able to switch the
display.
•
The screen may be distorted when you switch the display. In this case,
refresh the screen by right-clicking on the Windows desktop and
clicking
Refresh in the pop-up menu.