SHAREBOT Next Generation, User Manual, Page: 63 / 66

63
3.3. Installation
WARNING: the manufacturer declines all responsibility for damages to things and/or people resulting from improper interventions carried out by unqualified,
untrained or unauthorized use.
To perform the task under consideration requires the following personal protective equipment:
Please refer also to the instructions regarding the residual risks and specific warnings.
3.3.1 Connection to electricity supply
WARNING: make sure that the circuit-breaker/isolator on the printer is in “0” position, i.e. turned off.
CAUTION: If the operating voltage is not responding to its demands, it is necessary to apply a transformer.
- Connect the power cable to the printer.
- Connect the power cable to the power socket on the wall.
- The socket-outlet must be installed near the equipment and shall be easily accessible
Additional warnings about the connection to the power supply:
- You need to install a suitable protection differential type upstream of the point of connection of the electric power of the machine, in order to isolate each
element in case of faults in the operation; the choice of differential protection device should not be inconsistent with the provisions of the law, with local regula-
tions, with the characteristics of the electrical system of the settlement and of the machine itself.
WARNING: the manufacturer declines all responsibility for damages to things and/or people resulting from improper interventions performed by unqualified
people, not trained, untrained or not authorized.
3.4. Storing
In case you need to keep for a period of time the machine before make install (or uninstall), it is recommended that you protect it properly and store it in a suit-
able environment, having the following characteristics:
- external surfaces are resistant to atmospheric agents;
- protected against access by unauthorized persons;
- equipped with fixed floor drain water, free from vibrations and passable to vehicles and lifting equipment;
- with the following environmental conditions:
- good ventilation;
- room temperature between -20° C and +50° C;
- relative humidity between 30% and 80%;
- in dry and dusty atmosphere.
4 | Starting and using the machine
WARNING: he manufacturer declines all responsibility for damages to things and/or people resulting from improper interventions performed by unqualified
people, not trained, untrained or not authorized.
To perform the tasks of commissioning of the machine you will need the following personal protective equipment: