SHAREBOT Next Generation, User Manual, Page: 58 / 66

58
1.4.4 Personal means of protection and rules of conduct
For each of the operations described in this manual are given protection means that the user is obliged to use and the rules of conduct to safeguard the safety
of users themselves.
1.4.5 Machine status
The status of the machine is the characteristic that describes both the mode of operation (for example, vehicle shutdown) as well as the status of these securities
(for example, including guards, guards excluded, isolated from the power supply).
2 | Safety and technical data
General information on safety
2.1.1 Design criteria
For the design of the machine were adopted the principles and concepts introduced by the relevant paragraphs of the harmonized standards listed in table 1.
Table 1 – main harmonised standards used in the design
Legislation: UNI EN ISO 12100: 2010 Title: Safety of machinery - General principles for design - Risk assessment and risk reduction
Legislation: UNI EN 953: 2009 Title: Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
Legislation: CEI EN 60204-1: 2006 Title: Safety of machinery - Electrical equipment of machines – Part 1: General rules
Compliance with the relevant paragraphs of the abovementioned harmonized standards has made it possible to eliminate or reduce risks as best as possible,
both during normal operation and during maintenance and adjustment throughout the life cycle of the machine.
The equipment used was chosen carefully among those available on the market and the materials making up the machine (and the accessories) to be free from
risks to health and the health of their people. All parts supplied by third parties are marked CE (when applicable) and conform to the relevant reference direc-
tives. All details were strictly controlled in accordance with the standards prescribed by the regulations.
For the machine were adopted, moreover, warning measures and necessary protection against risks.
2.2 Devices and Security Solutions
For machinary were adopted devices and constructive solutions described below.
Fixed guards to protect the transmission of motion and part mobile bodies.
Safety signs of danger and prohibition at fixed shelters and the risks present.
2.3 Warnings regarding risks
In order to avoid any dangerous conditions for persons or damage to the machine caused by residual risks, namely those risks remain despite all the measures
taken, or to be potential risks not evident, the manufacturer advises users of the machine follow the instructions indicated in the following pages.
Warning: always adhere to the warnings and indications of labels applied to the machine and operate exclusively in accordance with the instructions given in
this manual.
2.3.1 Llifting and transporting
2.3.1.1 RISKS PRESENT DURING LIFTING AND TRANSPORTING
During lifting and transport there are risks related to:
- operations on the machine by unqualified, untrained, uninformed, untrained or improperly fitted;
- crushing limbs of operators handling personnel;
- projection of moving parts of the machine non-removable or not fitted properly;
- impact or fall by machine components, damaging the machine itself and its protections.
2.3.1.2 PERSONAL PROTECTIVE EQUIPMENT REQUIRED