SGM Technology for lighting
GB
User Manual 1.00
Genio Mobile
- 46 -
Step 3 – CHOOSING THE DAY
1.
Use the UP key to pass to the “DAY=MON” menu
2.
Press “Enter” and “DAY=” will begin to flash
3.
Use the UP/DOWN keys to choose the day of the week on which the event
must begin. The days of the week are expressed as follows:
- ALL
Every day
- MON Monday
- TUE
Tuesday
- WED Wednesday
- THU
Thursday
- FRI
Friday
- SAT
Saturday
- SUN
Sunday
4.
Press “Enter” to exit the DAY menu and confirm
Step 4 - START TIME
START TIME is used to configure: the hour, minutes and seconds in which an event containing a previously prepared
program will start.
1.
Use the UP key to pass to the “START_h=0” menu
2.
Press “Enter” and “START_h=” will begin to flash
3.
Use the UP/DOWN keys to choose the hour at which the program has to start
(from 0 to 23)
4.
Press “Enter” to exit the “START_h” menu and confirm
5.
Use the UP key to pass to the “START_m=0” menu
6.
Press “Enter” and “START_m=” will begin to flash
7.
Use the UP/DOWN keys to choose the minutes at which the program has to
start (from 0 to 59)
8.
Press “Enter” to exit the “START_m” menu and confirm
9.
Use the UP key to pass to the “START_s=0” menu
10.
Press “Enter” and “START_s=” will begin to flash
11.
Use the UP/DOWN keys to choose the seconds at which the program has to
start (from 0 to 59)
12.
Press “Enter” to exit the “START_s” menu and confirm
Step 5 - END TIME
END TIME is used to configure: the hour, minutes and seconds in which an event containing a previously
prepared program will end.
1.
Use the UP key to pass to the “END_h=0” menu
2.
Press “Enter” and “END_h=” will begin to flash
3.
Use the UP/DOWN keys to choose the hour at which the program has to end
(from 0 to 23)
4.
Press “Enter” to exit the “END_h” menu and confirm
5.
Use the UP key to pass to the “END_m=0” menu
6.
Press “Enter” and “END_m=” will begin to flash
7.
Use the UP/DOWN keys to choose the minutes at which the program has to
end (from 0 to 59)
8.
Press “Enter” to exit the “END_m” menu and confirm
9.
Use the UP key to pass to the “END_s=0” menu
10.
Press “Enter” and “END_s=” will begin to flash
11.
Use the UP/DOWN keys to choose the seconds at which the program has to
end (from 0 to 59)
12.
Press “Enter” to exit the “END_s” menu and confirm
DAY=FRI
START_h=21
START_m=15
START_s=30
END_h=23
END_m=30
END_s=30
