SGM Technology for lighting
GB
User Manual 1.00
Genio Mobile
- 8 -
1.2
Genio Mobile Functions
U
SITT DMX
512
All the Genio Mobile functions can be controlled via USITT standard DMX 512 serial digital signals, or via RS
232 serial signals. Genio Mobile generates a proprietary data transmission protocol when systems run
directly by on-board programming of a Master-Slave nature are used
Genio Mobile requires six channels to control all its attributes. All parameters are controlled and
programmed by an on-board MOTOROLA DSP 56F 803 processor
C
OOLING
The radiator on the rear panel of the LED matrix ensures correct convection cooling. A self-adjusting
internal temperature system ensures continuous operation even in critical thermal conditions
.
C
OLOUR
Three groups of Red, Green and Blue LEDs make up the matrix that generates Genio Mobile’s light beam.
Their layout in the matrix ensures that the emitted light can be controlled as far as Colour, Intensity and
Temperature are concerned. Genio Mobile’s colour generation system is therefore based on the concept of
additive colour mixing, where the sum of the various intensities of Red, Green and Blue, (RGB) enables to
create any other colour with the required tone or saturation
L
EDS
The source of the Genio consists in 3-Watt LUXEON LEDs, each generating a maximum luminosity of 80
lumen.
D
IMMER
The electronic control of the luminous intensity of the LEDs ensures precise emission adjustment, without
colour or colour temperature variation over the entire range from 0 to 100 %, in a regular uniform manner.
S
HUTTER
The shutter control parameter ensures instant light beam opening and closing effects. The characteristics of
the LEDs allow to obtain strobe effects with adjustable or random flash power and rate with exceptional
precision and intensity, thanks to the lack of any mechanical form of beam blackout.
M
ACRO
The Macro parameter allows to select via DMX a series of preset on-board colour and dimmer (or
combined) effects whenever they are required. Rainbow effects with different speeds and random or
Colour-dimming and Color-strobe, can be enabled without having to be programmed beforehand.
M
EMORIES
Comprehensive programming can be carried on-board the fixture, thus enabling playback in a fully stand-
alone status without the aid of external DMX control. It’s also possible to program playback times and
modes in the space of 24 hours, with a 7-day repetitive cycle.
Complete stand-alone systems can be realized, with absolutely no external controls and up to 30 fixtures;
with operating times and modes programmed and controlled using Master/Slave connections.
One Show made up of ten scenes can be programmed on each fixture.
D
ISPLAY
Genio Mobile has a 2 lines 16 characters display for user-friendly navigation through the fixture’s setting,
diagnosis and programming menus. Flip, Dimm (brightness) and ON/OFF functions are available to
facilitate consultation and use
.
