GB
SGM Technology for lighting
Genio Mobile
User Manual 1.00
- 15 -
2.5
Installing via the Fast-Lock “G” clamps
The Genio Mobile can be hung on any support or truss structure using Fast-Lock “G” clamps. There are no indications
against using any particular position for the clamps in the fixture’s base.
1.
Insert the quick-lock fasteners of the Fast-Lock “G” clamp into the respective holes on the bracket.
2.
Tighten the quick-lock fasteners fully clockwise.
3.
Pull the safety-chain through the holes on the bottom of the base and over the trussing system or a
safe fixation spot.
4.
Insert the end in the carabine and tighten the safety screw.
The installation of the fixture has to be built and constructed in a way that it can hold 10
times the weight for 1 hour without any harming deformation.
Overhead mounting requires extensive experience, including amongst others calculating working
load limits, installation material being used, and periodic safety inspection of all installation material
and the device. If you lack these qualifications, do not attempt the installation yourself. Improper
installation can result in bodily injury.
The fixture should be installed outside areas where persons may reach it, walk by or be seated
The installation must always be secured with a secondary safety attachment, e.g. an appropriate
safety cable.
Never stand directly below the device when mounting, removing or servicing the fixture.
The operator has to make sure the safety relating and machine technical installations are approved
by an expert before taking the device into operation for the first time.
These installations have to be approved by a skilled person once a year.
Safety Chain
