SGM Technology for lighting
GB
User Manual 1.00
Genio Mobile
- 26 -
3.3
Structure of the Menu
This chapter covers all the functions that can be accessed by the microcomputer’s menus. These functions
allow to set the fixture according to one’s needs, obtain information on its operation, test its various parts
and lastly program it, if it has to be used in Stand-alone mode.
The Up and Down keys on the front control panel enable users to scroll through the various menu items. In
the selected menu, they enable to modify the necessary parameters.
The ENTER key gives access to the selected menu, and once the necessary modifications have been carried
out, enables changes to be confirmed.
Menu
Options
Description
GENIO 1.0
-
Initial item of menu
Addr
001 - 504
Fixture addressing
Pmove
Norm / Rev
Allows to set the PAN movement in normal direction (Norm) or in
reverse direction (Rev).
Default Configuration = Norm
PP_MIN
0
Allows to change the PAN minimum position in degrees
Default Configuration = 0
PP_MAX
540
Allows to change the PAN maximum position in degrees
Default Configuration = 540
Tmove
Norm / Rev
Allows to set the TILT movement in normal direction (Norm) or in reverse
direction (Rev).
Default Configuration = Norm
TP_MIN
0
Allows to change the TILT minimum position in degrees
Default Configuration = 0
TP_MAX
270
Allows to change the TILT maximum position in degrees
Default Configuration= 270
Swap
ON / OFF
Inverts the PAN control with the TILT control and vice versa
Default Configuration = OFF
COLBALANCE -
Access to the functions for setting the white balance
ON
Enables the white balance of the COLBALANCE menu
BALANCE
OFF
Disables the white balance of the COLBALANCE menu
R_h
-
Red LED elapsed time reading menu. Can be reset
G_h
-
Green LED elapsed time reading menu. Can be reset
B_h
-
Blue LED elapsed time reading menu. Can be reset
L_h
-
Overall fixture elapsed time reading menu.
DMX
DMX signal input. No need to be set, the fixture automatically
detect the signal.
SIGN
RS 232
RS 232 signal input. No need to be set, the fixture automatically detect the
signal.
SMD
16 bit / 8 bit
Allows to select the control type of PAN and TILT: 16 bit or 8 bit
Default configuration = 16 bit
BRIGH
100 – 85 – 70 – 50 –
35
25 – 10 – 0 (%)
Allows to adjust display brightness
Default configuration = 85 %
0 – 998 (sec) - UNL
It’s possible to decide for how many seconds the fixture’s last channel
status has to be held in the event of there being no DMX signal
(default =
UNL)
DMXDLY
UNL
Always maintains the last channel status even in the event of no DMX
signal
DAY
MON - TUE - WED -
THU - FRI - SAT-
SUN
Sets the day of the week
CLOCK
Hh : mm : ss
Sets the on-board clock’s hours, minutes and seconds
SET
Enables to set the fixture’s Default work parameters
FACT
OFF
FACT value during normal operation
