24
│ 3 Using the system
3.3.1.1 Adding a pipe section
The first pipe section is set on transmitter 1.
● Up to four more pipe sections can be added between the first
pipe section and transmitter 2.
●
New pipe sections are added to the right of the selected pipe
section.
The
Pipe sections
menu is open.
1. Tap on the pipe section beside which you want to add a new
pipe section. The pipe section will be highlighted in blue.
2. Tap on the
Add
button. A new pipe section will be added.
Note:
Adjust the pipe data for the new pipe section (section 3.3.2).
3. Apply the settings by pressing
Confirm
. The receiver will
switch back to the main view.
3.3.1.2 Deleting a pipe section
Pipe sections can be deleted.
The last remaining pipe section cannot be deleted. The pipe
data for it, however, can be reset to the default values by going
through the deletion process.
The
Pipe sections
menu is open.
1. Tap the pipe section to be deleted. The pipe section will be
highlighted in blue.
2. Tap the selected pipe section again. The pipe section will be
deleted without any further confirmation prompt.
3. Apply the settings by pressing
Confirm
. The receiver will
switch back to the main view.
