1 Introduction
│
3
1.4
General safety information
This product was manufactured in keeping with all binding legal
and safety regulations. It corresponds to the state of the art and
complies with conformity requirements. The product is safe to
operate when used in accordance with the instructions provided.
However, if you handle the product improperly or not as intend-
ed, the product may present a risk to persons and property. For
this reason, observe the following safety information without fail.
Risk of personal injury (health risk)
●
Handle the components carefully and safely both during trans-
port and when working.
● Proceed with extreme caution in the vicinity of electrical lines.
Hazards for the product and other property
●
Always handle the components carefully.
●
Do not drop the components.
●
Do not place the components in places where they are at risk
of falling.
●
The aerials of the
C 200
receiver and
RT 200
transmitter must
not be damaged.
−
Never bend, kink or cut the aerial.
−
Never carry the
C 200
receiver by its aerial.
●
Before starting work, check that the components are in good
working order. Never use damaged or defective components.
●
Ensure that no dirt or moisture gets into the connections on
the components.
●
Always observe the permitted operating and storage temper-
atures.
