4 Settings
│
53
The main view is open.
1. Tap the
Settings
button. The
Settings
menu appears.
2. Tap the
Measurement
button. The
Measurement
menu ap-
pears.
3. Adjust the settings as required.
The
Measurement
menu is divided into three views
General
,
Filter basis
and
Pipe data (Default)
.
Switch between the views using the
Scroll
buttons.
The settings options are explained in the next sections.
4. Finally, tap
Back
. The
Settings
menu appears.
5. Tap
Back
again to return to the main view.
4.3.1
General
4.3.1.1 Units
Different units can be used for specifying the pipe data.
The options are:
●
Metric
Length specified in metres (m) and diameter specified in mil
-
limetres (mm).
●
Anglo-American
Length specified in feet (ft.) and diameter specified in inches
(in.).
4.3.1.2 Interference suppression
Excessive noise can be suppressed to varying degrees
The options are:
●
On
Interference suppression is enabled. Some slightly quieter
noises may be excluded from the correlation.
●
Off
Interference suppression is disabled.
