48
│ 3 Using the system
The receiver is switched on. The main view is open.
1. Connect a microphone (e.g.
UM 200
) to the microphone sock-
et on the receiver.
2. Attach the microphone to a suitable measurement location.
3. Tap the
Transmitter
button. The
Transmitter
menu will ap-
pear. The
Microphone
button can be seen at the bottom right.
Which microphone symbol appears on the
Microphone
but-
ton depends on the microphone connected.
4. Tap the
Microphone
button. The
Microphone
menu will ap-
pear.
5. Tap the
Listen to microphone
button to start a measure-
ment.
6. Adjust the volume to the current situation.
− Proceed as explained in
−
Please note the health hazard warning in the same section.
7. Tap the
Switch noise off
button when you want to stop the
measurement.
Exiting the Microphone menu
●
To return to the
Transmitter
menu, tap the
Transmitter
button.
●
To return to the main view, tap
Back
.
3.9
Locking and unlocking the display
The display can be locked against unintentional operation.
Locking
1.
Briefly press the ON/OFF key. The receiver switches to the
Switching off
menu for 3 seconds.
2. Tap
Lock display
. The display switches off immediately.
Unlocking
● Briefly press the
ON/OFF key
again. The receiver displays
the
Switching off
menu. The display changes to the last view
shown after 3 seconds.
