2 AQUAPHON system │
15
●
Measurement
●
Application
●
Device
For more detailed information on the
Settings
menu, please refer
2.2.3
TS 200 carrying rod
The
TS 200
carrying rod is for use with microphones
BM 200
,
BM 230
and
TM 200
. The selected microphone must be attached
to the carrying rod.
Overviews with the names of all the parts of the carrying rod can
be found inside the front cover (fig. 3 to fig. 5).
For more detailed information about the microphones, please
refer to section 2.2.4 on page 16.
Safety information for using the TS 200
●
Handle the carrying rod carefully and safely both during trans-
port and when working.
Be particularly careful when the touch microphone and probe
tip are screwed onto the carrying rod.
●
Do not lean on the carrying rod.
Star knob and fastening screw on the adapter
There is a star knob on the adapter. The star knob is fixed in a
fastening screw.
The microphone is screwed onto to the carrying rod with the
star knob. The star knob can be removed from the adapter if
necessary.
Information on attaching microphones to the carrying rod can be
found in section 3.1 on page 21. Please note in particular the
warning.
Sensor area
A measurement can be started by touching the sensor area. The
sensor area can be operated in two different modes. Information
about the modes can be found in section 4.3.4 on page 49.
