3 Using the system
│
39
−
If several measurements are saved one after the other
and the receiver is not switched off in between:
The additional information from the previous measure-
ment can be applied to the following measurement. To do
this tap on
Use last data
. The applied data can be edited.
b) Finally tap on
Confirm
to save the measurement with the
additional information.
Adding to or editing additional information
Each measurement is only saved once. As long as a measure-
ment is displayed as a recorded measurement in the measure-
ment value selection, however, you can add to or edit the addi-
tional information about this measurement.
●
Save the recorded noise again. and in doing so add the rele-
vant additional information. Previous additional information is
overwritten.
3.9
Deleting the recorded measurement
Recorded measurements can be deleted individually.
The
Audio player 1/2
menu is open.
1. Tap the measurement you want to delete in the measurement
value selection.
2. Tap the
Clear
button. The measurement will be deleted im-
mediately without further prompting.
For information about deleting saved measurements, please re-
fer to section 3.11 on page 41.
3.10
Loading a saved measurement
Saved measurements can be loaded from the memory. The noise
from loaded measurements can be played back repeatedly. Infor-
mation about the measurement can also be displayed.
Note:
Only one measurement can be loaded at a time.
