3 Using the system
│
41
Fig. 24:
Filter by date
button
Left image: No filter set
Right image: Filter set (2019 as year, 01 (January) as month)
The
Load noise
menu is open.
1. Tap the
Filter by date
button on the top left. The
Filter by
date
menu will appear.
2.
Set the values for the filters.
− Left field: Year, right field: month
−
The
Any
value means that no filter is set.
−
Only values that have been saved for the data can be se-
lected as filter criteria.
Example:
Measurements were saved in 2017 and 2019. No measure-
ments were saved in 2018. The filter criteria available for
selection are: Any, 2017, 2019.
3.
Apply the filters by pressing
Confirm
. The receiver returns to
the
Load noise
menu.
The list shows all the measurements that meet the filter crite
-
ria. The filters set are displayed on the
Filter by date
button.
3.11
Deleting a saved measurement
Saved measurements can be deleted individually. To do this de-
lete mode needs to be enabled.
