5 Maintenance
│
57
5
Maintenance
5.1
Charging the batteries
The batteries for the following components must be recharged
when necessary:
●
A 200
receiver (lithium-ion rechargeable battery)
●
TS 200
carrying rod ((lithium-ion rechargeable battery)
●
F8
wireless headphones (NiMH rechargeable battery)
The typical charging time is less than 7.5 hours. The batteries
are protected against overcharging. The components can, there-
fore, remain connected to the power supply after they are fully
charged.
Always observe the permitted temperature range during charg-
ing. If the temperature falls below or exceeds the limit values,
charging stops until the temperature returns to within the per-
mitted range.
There are two ways of charging the components:
●
All components at the same time in the
AQUAPHON A 200
case
●
Each component individually using the AC/DC adapter or ve-
hicle cable
5.1.1
Charging the batteries in the case
The batteries of the components can all be charged simultane-
ously in the
AC 200 SK 4
case. The case is connected to the
power supply using AC/DC adapter
L
or vehicle cable
L
.
The AC/DC adapter and the vehicle cable are available to buy
as accessories.
The connection cable for the components can be found in the
case. There is a connection socket on the outside of the case for
connecting to the power supply.
