manualshive.com logo in svg

SEW-Eurodrive MOVIFIT compact, Operating Instructions Manual, Page: 85 / 120

Share
Download
SEW-Eurodrive MOVIFIT compact Operating Instructions Manual Download Page 85

7

Operation

Manual operation with the MBBG11A operator panel

Operating Instructions – MOVIFIT

®

 compact

85

Deactivating manual operation

 WARNING

Risk of crushing due to unexpected start-up of the drive. The signals of the higher-
level controller are effective immediately when automatic operation is activated. The
drive runs with the speed that is specified by the higher-level controller.

Severe or fatal injuries.

•

Ensure that no persons are present in the hazard zone of the drive.

•

Before  you  activate  automatic  operation  with  the  <RUN>  key,  you  must  set  the
signals of the higher-level controller so that the drive does is not enabled.

Deactivate manual mode as follows:

1. Stop the drive with the <STOP/RESET> key.

2. Deactivate manual operation using the <OUT> key.

3. Activate automatic operation using the <RUN> key.

22527060/EN – 08/2017

Summary of Contents for MOVIFIT compact

























































































































Reviews:

No comments