manualshive.com logo in svg

SEW-Eurodrive MOVIFIT compact, Operating Instructions Manual, Page: 18 / 120

Share
Download
SEW-Eurodrive MOVIFIT compact Operating Instructions Manual Download Page 18

4

Mechanical installation

Installation requirements

Operating Instructions – MOVIFIT

®

 compact

18

4.3

Installation requirements

Make  sure  that  the  following  requirements  are  met  before  you  start  installing  the
device:

•

The  information  on  the  nameplate  of  the  MOVIFIT

®

  device  corresponds  to  the

mains voltage.

•

The MOVIFIT

®

 device is undamaged (no damage caused by transport or storage).

•

The  ambient  temperature  corresponds  to  the  specifications  in  chapter  "Technical
data".

•

The MOVIFIT

®

 device must 

not

 be installed under the following damaging ambient

conditions:

– Potentially explosive atmosphere

– Oils

– Acids

– Gases

– Vapors

– Radiation

– etc.

4.4

Permitted mounting position

The  following  illustration  shows  the  mounting  positions  of  the  MOVIFIT

®

  compact

device.

M1

M2

M5

M3

M4

M6

[1]

16938588555

[1] Do not install the MOVIFIT

®

 compact device 

in mounting position M3

.

The MOVIFIT

®

 compact device may be installed in any other mounting position.

22527060/EN – 08/2017

Summary of Contents for MOVIFIT compact

























































































































Reviews:

No comments