manualshive.com logo in svg

SEW-Eurodrive MOVIFIT compact, Operating Instructions Manual, Page: 43 / 120

Share
Download
SEW-Eurodrive MOVIFIT compact Operating Instructions Manual Download Page 43

6

Startup

General information

Operating Instructions – MOVIFIT

®

 compact

43

6

Startup

6.1

General information

INFORMATION

You  must  comply  with  the  general  safety  notes  in  the  chapter  "Safety  notes"  during
startup.

 WARNING

Electric shock due to dangerous voltages in the ABOX.

Severe or fatal injuries.

•

De-energize  the  MOVIFIT

®

  device.  Observe  the  minimum  switch-off  time  after

disconnection from the supply system:

–

1 minute

 WARNING

Electric shock due to missing or defective protective covers.

Severe or fatal injuries.

•

Make sure all protective covers are installed properly.

•

Never start the device if the protective covers are not installed.

 WARNING

Danger if the motor starts up unintentionally.

Fatal or severe injuries and damage to property.

•

Before starting the work, switch off the power to the MOVIFIT

®

 device.

•

Safeguard the MOVIFIT

®

 device from unintentional activation.

 WARNING

Uncontrolled device behavior due to ineffective emergency off circuit.

Severe or fatal injuries.

•

Comply with the installation notes.

•

Always have the installation carried out by a trained specialist.

 WARNING

Device malfunction due to incorrect device setting.

Severe or fatal injuries.

•

Observe the startup instructions.

•

Always have the installation carried out by a trained specialist.

•

Check the parameters.

•

Only use settings that are correct for the function.

22527060/EN – 08/2017

Summary of Contents for MOVIFIT compact

























































































































Reviews:

No comments