manualshive.com logo in svg

SEW-Eurodrive MOVIFIT compact, Operating Instructions Manual, Page: 47 / 120

Share
Download
SEW-Eurodrive MOVIFIT compact Operating Instructions Manual Download Page 47

6

Startup

Startup procedure for MOVIFIT® compact motor starter

Operating Instructions – MOVIFIT

®

 compact

47

6.4

Startup procedure for MOVIFIT

®

 compact motor starter

Startup

procedure

for

MOVIFIT®

compact

motor

starter

To start up the motor starter, proceed as follows:

1. Check the connection of the MOVIFIT

®

 compact device.

ð

See chapter "Electrical installation".

2. Ensure that the motor does not start up, and that there is no hazard from an un-

wanted motor startup.

3. Switch on the line voltage. The “STATUS” LED illuminates in yellow.

4. Connect  the  MBBG11A  operator  panel  or  PC/laptop  to  the  MOVIFIT

®

  compact

device.

ð

See chapter "Connecting the MBBG11A operator panel"

ð

or chapter "Connecting a PC/laptop".

5. For a simple startup, set the parameters of the motor as described in the following

chapters.  The  following  operating  modes  are  available  in  the  MOVIFIT

®

  compact

motor starter for operating an asynchronous motor:

ð

Voltage limiting

ð

Current limiting

6.

NOTICE! 

Loss of the ensured degree of protection if the screw plug is not installed

or  not  installed  correctly  on  the  diagnostic  interface.  Damage  to  the  MOVIFIT

®

compact device. 
Make sure the screw plug of the diagnostic interface has a seal and screw it in.

7. Switch off the line voltage.

8. Set  the  AS-Interface  slave  address  of  the  MOVIFIT

®

  compact  device  (only

with MOVIFIT

®

 compact with AS-Interface).

ð

See chapter "Assigning the AS-Interface slave address".

9. Start up the higher-level controller.

10. Connect the plug of the motor to the MOVIFIT

®

 compact.

11. Switch on the line voltage.

The  MOVIFIT

®

  compact  drive  can  now  be  controlled  using  the  higher-level  controller

(binary signals or via AS-Interface).

22527060/EN – 08/2017

Summary of Contents for MOVIFIT compact

























































































































Reviews:

No comments