SEW-Eurodrive MOVIFIT compact Operating Instructions Manual Download Page 20

Page: 20 / 120

Electrical installation

General information

Operating Instructions – MOVIFIT

compact

Electrical installation

5.1

General information

Observe the following notes for installation:

•

Always observe the general safety notes.

•

Only install MOVIFIT

on a level, low-vibration, and torsionally rigid substructure;

see chapter "Permitted mounting position".

•

Strictly observe all instructions referring to the technical data and the permissible
conditions regarding the place of installation.

•

Only use the provided attachment options when mounting the device.

•

When selecting and dimensioning the mounting and safety elements, observe the
applicable standards, the technical data of the units, and the local circumstances.

•

Use the right cable seals for the cables.

•

Close off unused cable entries with seals (without cable entry).

•

Cover the unused plug connectors with blind caps.

•

Use suitable mating connectors with plug connector variants.

5.2

Low-voltage supply systems

The device is only suitable and approved for operation on the following systems:

•

TN and TT systems with directly grounded star point

22527060/EN – 08/2017

Summary of Contents for MOVIFIT compact

























































































































Search results

Summary of Contents for MOVIFIT compact

Reviews:

SEW-Eurodrive MOVIFIT compact, Operating Instructions Manual, Page: 20 / 120

Search results

Summary of Contents for MOVIFIT compact

Reviews: