SEW-Eurodrive Movidrive MDX60B, Compact Operating Instructions

Page: 21 / 64

5
Operation
Memory card
Compact Operating Instructions – MOVIDRIVE
®
MDX60B/61B
21
No
. Text DBG60B/
MotionStudio Description
6 VALUE TOO HIGH Attempt to enter a value that is too high.
7 VALUE TOO LOW Attempt to enter a value that is too low.
8 REQ. CARD MISS-
ING The option card required for the selected function is miss-
ing.
10 ONLY VIA ST1 Manual mode must be completed using X13:ST11/ST12
(RS485).
11 ONLY TERMINAL Manual operation must be exited via TERMINAL (DBG60B
or USB11/UWS21B).
12 NO ACCESS Access to selected parameter denied.
13 REG. INHIBIT
MISSING Set terminal DIØØ "/Controller inhibit" = "0" for the selected
function.
14 INVALID VALUE Attempt to enter an invalid value.
16 PARAM. NOT
SAVED Overflow of EEPROM buffer, e.g. through cyclic write ac-
cess. Parameter not stored in non-volatile EEPROM.
17 INVERTER EN-
ABLED
• Parameter to be changed can only be set in the state
"CONTROLLER INHIBIT".
• You tried to change to manual mode during live opera-
tion.
5.3 Memory card
The pluggable memory card is installed in the basic unit. The basic data is stored on
the memory card and is always up-to-date. If a unit has to be replaced, the system/
machine can be operated again quickly without a PC and data backup simply by
replugging the memory card. You can install as many option cards as required.
The following figure shows the MDX60B/61B memory card.
1810728715
Part number: 08248834
5.3.1 Notes for replacing the memory card
• Only plug or remove in the memory card when the MOVIDRIVE
®
B is switched off.
• You can install the memory card from the original unit in a new inverter. The fol-
lowing combinations are permitted:
24770531/EN – 11/2017