5
Startup with PROFINET IO
Controlling the stations in test run
Manual – MOVI-C
®
CONTROLLER advanced with PROFINET IO Fieldbus Interface
74
2. Establish
an
online
connection
between
the
PLC
and
the
MOVI‑C
®
CONTROLLER. Click on the "Go online" icon.
22807328651
ð
In the network view and device view, all addressed stations are shown with a
green check mark.
3. Add a new watch table in the "Watch and force tables" subfolder of the PLC.
4. Enter the addresses of the process data words in the "address" column. The input
addresses and output addresses define which process data word is used to ad-
dress a station. Make sure that the process data words are in the address range of
the stations and that the address ranges for input data words and output data
words are identical.
24777730/EN – 01/2018
