3
Introduction
MOVISUITE® engineering software
Manual – MOVI-C
®
CONTROLLER advanced with PROFINET IO Fieldbus Interface
19
3.3
MOVISUITE
®
engineering software
MOVISUITE
®
engineering
software
The new MOVISUITE
®
engineering software is the operating platform for all MOVI-C
®
hardware and software components.
The following MOVI-C
®
devices are currently supported by MOVISUITE
®
:
•
MOVI-C
®
CONTROLLER
•
MOVIDRIVE
®
modular application inverter, single-axis module and double-axis
module
•
MOVIDRIVE
®
system application inverter
The following engineering tasks can be conveniently performed with MOVISUITE
®
:
•
Configuration
•
Startup
•
Parameter setting
•
Programming
•
Diagnostics
3.3.1
Advantages of MOVISUITE
®
MOVISUITE
®
offers the following advantages:
•
Easy and intuitive operation
•
Project management for storing the devices and data sets
•
Convenient forwarding of projects via automatically created e-mails
•
Automatic project creation from scanned devices
•
Startup preparation in the planning phase even without connected devices
•
Design of the drive train from the motor to the gear unit via the product catalog or
automatic identification of the gearmotor data by reading the electronic nameplate
stored in the motor encoder.
•
Product catalog for selecting encoders, brakes, control modes, user units
•
Provision of standard drive trains and drive functions summarized in FCBs (
f
unc-
tion
c
ontrol
b
locks)
•
Convenient, graphical startup and parameterization of the drive train
•
Function view with overview of the status of the connected devices
•
Creation of an overall system by structuring the devices as needed in the function
view
•
Easily calling up different manual modes
•
Detailed messages and remedial measures in case of malfunction
•
Identifying and supporting device replacements
•
Synchronization functions for device data
•
Data management with clearly marked transfer directions during data transmission
•
Diagnostics of the drives with the integrated oscilloscope with up to 10 recording
channels
•
Integration of the IEC Editor for programming MOVI-C
®
CONTROLLER
•
Integration of MOVIKIT
®
MultiMotion and MultiMotion Camming (further MOVIKIT
®
modules will follow)
•
Long-term data acquisition on the engineering PC hard disk
24777730/EN – 01/2018
