manualshive.com logo in svg

SEW-Eurodrive INTERBUS UFI11A, Manual

Share
Download
SEW-Eurodrive INTERBUS UFI11A Manual Download Page 6

3

6

Manual – Fieldbus Interface INTERBUS UFI11A

Installation and Operation with Autosetup

3

Installation and Operation with Autosetup

3.1

Installation notes

Mounting

The unit can be mounted using the integrated DIN rail mounting option or directly onto
a switch cabinet wall using the four holes integrated into the back wall of the housing. In
the latter case, the two retaining screws for the DIN rail mounting must be removed.
Basically, there are no restrictions regarding positioning in relation to the inverters to be
connected (e.g. MOVITRAC

®

 07). In laying out the system, consider the maximum cable

length and the fact that the UFI11A must be the first or last node on the system bus
(SBus). 

The UFI11A must have additional HF-compliant grounding if the DIN rail mounting opti-
on is used in conjunction with SBus cables more than 1 m in length.

Pin assignment

The UFI11A fieldbus interface is equipped with a 9-pin sub D male connector for the in-
coming bus signal and a 9-pin sub D female connector for the outgoing bus signal ac-
cording to EN 50170.

05406AXX

Fig. 3:  Pinout of the 9-pin sub D male connector X3 to EN 50170 ([1] = 9-pin sub D male 

connector; [2] = Signal lines twisted pair; [3] = Conductive connection between the 
connector housing and the shield)

Summary of Contents for INTERBUS UFI11A





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands