Manual – MOVI-PLC® advanced DHF41B DeviceNet and PROFIBUS DP-V1 Fieldbus Interfaces
115
12
Executing functions with the units
Operating MOVITOOLS® MotionStudio
12.7 Executing functions with the units
12.7.1 Parameterizing units in the parameter tree
The parameter tree displays all unit parameters arranged in folders.
You can manage the unit parameters using the context menu or toolbar. The following
chapter describes how to read or change unit parameters.
12.7.2 Reading/changing unit parameters
To read or change unit parameters, proceed as follows:
1. Switch to the required view (project view or network view).
2. Select the communication mode:
• Click the [Switch to online mode] button [1] if you want to read or change
parameters directly on the
unit
.
• Click the [Switch to offline mode] button [2] if you want to read or change
parameters in the
project
.
3. Select the unit you want to set parameters for.
4. Open the context menu and select the [Parameter tree] command.
This opens the "Parameter tree" view on the right section of the screen.
5. Expand the "Parameter tree" up to the node you require.
6. Double-click to display a particular group of unit parameters.
7. Press the enter key to finalize any changes you make to numerical values in the input
fields.
64337AXX
12079AEN
Summary of Contents for DHF41B
Page 2: ...SEW EURODRIVE Driving the world ...
Page 123: ...SEW EURODRIVE Driving the world ...
