79
SESAMO
SMARTPRO
ELECTRONIC
KEY
Through this accessory together with the wing-locking device, it is possible to close the wings from the outside,
regardless of the logic selected on the advanced or basic selector.
Any power failure following this closure will not cause the doors to open.
Each time the electronic key is inserted, the automatism passes from a normal operation state to a closed and locked
state and vice versa. During the transition from the locked state to the normal operation state, the wings perform a
complete opening and closing manoeuvre so as to allow the entry of a person if necessary.
OPERATION
IN
CASE
OF
POWER
FAILURE:
S
MART
P
RO
M
In the absence of optional batteries SmartPRO M is designed so that it is always possible, even in the absence of
power, move manually the door after unlocking the electric lock, if installed.
In the presence of batteries and mains fail the operator can work with one of the following ways:
Anti-panic mode
: during a power failure the wings will stop in the open position, from the advanced selector it is possible
to select only the stop closed function.
Continuous operation
: when a power failure occurs, the automatism continues to operate with the set logic until the
batteries run down.
The choice of operation type is carried out during installation by a trained technician
OPERATION
IN
CASE
OF
POWER
FAILURE:
S
MART
P
RO
S
The automatism SmartPRO S is equipped with an integrated spring for closing the door in the absence of power. The
spring is adjustable as a function of weight / width of the door. The adjustment must be performed by qualified
technician following the instructions in the installation manual.
CLEANING
Cleaning
:
Object
Procedures
Painted surfaces
Clean with soap and water
Anodised surfaces
Clean with non-alkaline soap (pH 5.5 / 7) and water
Photocells
Clean with a damp cloth
Selectors
Clean with a damp cloth
