5
SESAMO
SMARTPRO
2.
INTENDED
USE
DANGER: The SMARTPRO automation must be used exclusively for the movement of
pedestrian swing doors.
The automatism for hinged doors is a monobloc composed of an electromechanical device that
allows the opening and closing of the door to be controlled by means of a trasmission arm.
The door is opened / closed by a spring /motor system or closed only by a spring in the event of a
power failure. Inside the protection casing there is also the electronic control device that allows to
program and control the operation of the system.
3.
APPLICATION
LIMITS
DANGER: For a correct application of the automatism the door must not exceed the weight
and the width indicated in the diagram of Fig.2. Each transmission arm also corresponds to a
different maximum depth value of the jamb above which it is not possible to correctly install the
system. The automatism is designed exclusively for the normal operation of swing doors in dry
environments, and must be installed inside buildings. SESAMO declines all responsibility for any
damage deriving of any application or use outside the intended purposes and from unauthorized
modifications.
4.
LOW ENERGY
SMARTPRO can be set in the order to meet requirements of Low-Energy application according EN16005.
- reduced dynamic force;
- low speed;
- reduced dynamic/static force.
It is installer's responsibility to verify the compliance of the installation Low-Energy compared with current
standards. The protection of the closing edge must be assessed individually
.
5.
PRELIMINARY
CHECKS
Before installing the automatism please check:
–
verify the installation does not create dangerous situations;
–
prearrange proper pipes and conduits for the wires, granting the protection of the same against mechanical
damages;
–
the surface where fixing the automatism has to be resistant. Use screws, bolts, etc. adequate to the type of
surface;
–
the structure of the door has to be strong to hold the weight of the automatism as well the hinges, also
check to not have friction between fixed and mobile parts;
–
use proper equipment and tools to install in security and in accordance with the regulations.
