6
SESAMO
SMARTPRO
6.
MACHINE DIRECTIVE
The installer who motorized a door becomes the automatic door machine manufacturer according to
directive 2006/42/CE and must:
1.
Arrange the Technical Booklet with the documents indicated in attachment VII of the Machine
Directive and keep them for at least 10 years.
2.
Draft the CE declaration of conformity according to attachment II-A of the machine directive and
provide the use with a copy.
3.
Apply the CE markings on the motorized door according to point 1.7.3 of attachment I of the
machine directive.
4.
In particular, but not exclusively, if for the purpose of the standard EN 16005 it is necessary to
install monitored sensors, the wiring has to carry out as described in this manual and the correct
sensors operation has to be checked following instruction manual of the sensors themselves.
For more information and for assist installers in applying the specifications of the directives and of
European standards concerning the safe use of motorized gates/doors consult the guidelines available
on internet at the address www.sesamo.eu
DECLARATION OF INCORPORATION
(Directive 2006/42/CE, Annex II, part B)
Manufacturer: SESAMO S.R.L.
Address: Str. Gabannone 8/10 - 15030 Terruggia
–
AL -ITALY
Declares that the product:
SmartPro
- is made to be incorporated in a machine to construct a machine considered by Directive 2006/42/CE
- conforms with the essential safety requirements indicated in appendix I of the directive with the exception
of the following points:
1.2.4.3, 1.2.4.4, 1.3.4, 1.3.5, 1.3.7, 1.3.8.2, 1.4, 1.5.3, 1.5.7, 1.5.14, 1.5.15,
1.5.16
- complies with the conditions of the following other CE Directives: 2014/30/UE Electromagnetic
Compatibility, 2014/35/UE Low Voltage
And that:
- the following (parts/clauses of) agreed regulations have been applied:
EN 60335-2-103
EN 61000-6-2
EN 61000 -6
–
3
EN16005
and also declares that:
- the relevant technical documentation has been completed in accordance with part B of appendix VII; this
documentation, or parts of it, will be delivered electronically or by traditional post upon justified request
from the competent national authorities
- the relative technical documentation will be compiled by: SESAMO SRL, Strada Gabannone, 8/10 - 15030
Terruggia (AL)
–
Italy
- it is not permitted to use the product until the machine in which it will be incorporated or will become a
component of has been identified and has received the declaration of conformity with the conditions of
Directive 2006/42/CE and the national legislation that transposes it, in other words, until the machinery
referred to in this declaration forms a single unit with the machine.
SESAMO S.R.L.
Aldo Amerio
June 2019
