Servomex Servotough SpectraScan 2400, User Manual

Page: 26 / 76

SERVOTOUGH SpectraScan User Manual
02400001A/1 24
5.0.1 Dimensions, Weight and Ventilation
The Servomex SpectraScan Gas Analyzer weighs approximately 30 lbs (14kg) and is designed to
be wall mounted. It requires a space 17 ¼” wide, 12” high (top to bottom) with an additional 6” of
clearance around the bottom for piping and electrical connections, and 7” wide (front to back) with
an additional 10 ½” clearance out the front to allow opening of the cover (when installing electrical
connections, or to make internal repairs or component replacements).
WARNING
Personal Injury: Improper installation can result in serious personal injury.
Make sure that the mounting structure can support a redundant weight factor
four times the total weight of the analyzer. If not, reinforce the structure before
installing the analyzer. The mounting structure must be made of metal, or at
minimum ½” plywood.
Dimensions of the mounting holes along the top and bottom edges of the analyzer are given in
Figure 2 below. The Servomex SpectraScan Gas Analyzer must be mounted with eight 3/8”-16 x 1”
UNC bolts and matching lock washers and nuts.
Figure 2 - Hole Dimensions of the Servomex SpectraScan Gas Analyzer
See Figure 3 - I/O panel of the Servomex SpectraScan Gas Analyzer on page 24 for a view of the
bottom of the analyzer, showing electrical and pipe connections.