Servomex Servotough SpectraScan 2400, User Manual

Page: 66 / 76

SERVOTOUGH SpectraScan User Manual
02400001A/1 64
8. Apply heat sink around the perimeter of the new light source, and push the assembly back
into the mounting hole provided on the sensor head, making sure to orient it properly
(connector end toward I/O panel).
Figure 21 - Mounting Hole for Light Source
9. Replace the four bolts and four lock washers to secure the circuit board to the sensor head.
Tighten the bolts in a cross pattern.
10. Replace the connector back into its socket on the light source circuit board. The tab will
snap in place to lock the connector into position.
11. Re-close the blue bag by sealing the Velcro strip along its edges.
12. Close the cover and lock by rotating the latch.
Figure 20 - The Light Source Assembly