Servomex SERVOTOUGH LaserExact 2950, Operator'S Manual

Page: 28 / 72

SERVOTOUGH LaserExact Monitor, Operator Manual 02950001A_1
22 C
HAPTER
4
instrument. Your local distributor or SERVOMEX can provide the password on
request.
Note that if the connection is moved to another instrument the program must be
shut down and run again. It is possible to run several program windows
simultaneously to communicate with different instruments using one PC.
The service program can also be started without a connection to an instrument by
pressing <Demo mode>. This is for demonstration purposes of the service
program. Two extra files are needed for this mode to work: *
.dmp or *.rea and * .set
or *.stt . These files can be created using the service program when a PC is
connected to an instrument. The files are created by downloading the instrument
readings to *
.rea and settings to *. set (ref. Section 4.3.9). Alternatively, one can
use the files supplied with the service program on the CD. These files were
downloaded from the instrument at the factory prior to shipment.
4.2 The measurement menu
After pressing the <User mode> button the program opens the
Measurements
menu. The example below is for an instrument measuring oxygen.
The serial number of the instrument is shown in the title line of the menu. The
bottom right of the screen shows different menus which can be accessed either by