Servomex SERVOTOUGH LaserExact 2950, Operator'S Manual

Page: 18 / 72

SERVOTOUGH LaserExact Monitor, Operator Manual 02950001A_1
12 C
HAPTER
3
3.2.1 SERVOTOUGH LaserExact installation
WARNING
You must not modify the Laser monitor in any way (either
mechanically or electrically). If you do, the certification of the monitor
will be invalidated, and it may not operate safely.
WARNING
The Laser monitor is heavy (see section 1.7). Take care to handle
the analyser safely and securely during installation.
WARNING
The Laser monitor must be installed by a suitably skilled and
competent technician or engineer in accordance with this manual and
to the special conditions of installation contained within the manual.
WARNING
Make sure that power is disconnected or switched off before
connecting any cable.
WARNING
Obey the safety instructions given below when you install the Laser
monitor; if you do not, the monitor certification may be invalidated,
the monitor may not operate correctly, or it may be damaged.
WARNING
You must mount the Laser monitor on a structure which is capable of
supporting the mass of the Laser monitor (refer to product data).
WARNING
Sample and calibration gases may be toxic, asphyxiant or flammable.
Ensure that the external connections are leak free at full operating
pressure before use of sample or calibration gases and that they vent
to avoid exposure to personnel.