Sereniti SHS-2000, User Manual

Page: 144 / 202

P O R T F O R W A R D I N G
Delete a rule
126 | User Manual (v1.0.0.1)
1 0
Note:
Refer to the documentation that comes with the program or
device, or contact their support personnel, to determine which
ports have to be opened.
6
In the Relocate Port field, type a number only if you want to redirect
incoming traffic to a different port on a PC. This field is optional and is
rarely used in home networks.
Note:
If this rule is opening a single port, all traffic on that port will be
redirected to the relocate port. If this rule is opening a range of
ports, traffic on the first port in the range will be redirected to the
relocate port. Traffic on other ports in the range will be redi-
rected to the following sequence of ports. For example, if you
enter a port range of 80 – 85 and a relocate port of 90, incoming
traffic on ports 80-85 will be redirected to ports 90-95.
7
In the Protocol field, select either TCP or UDP from the drop-down
list.
Note:
TCP (Transmission Control Protocol) and UDP (User Datagram
Protocol) are protocols for exchanging data on the Internet. Refer
to the documentation that comes with the program or device, or
contact their support personnel, to determine which protocol is
used.
8
In the Enabled field, click the check box if you want the rule to take
effect immediately. If not, leave the box unchecked and return to it when
you need to activate the rule.
9
Click ADD to save the rule. You are returned to the Firewall Settings
page. The rule you created is displayed.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
D E L E T E A R U L E
You should delete any rules you no longer need. You can delete both
system and user defined rules. If you delete a system defined rule and