Sereniti SHS-2000, User Manual

Page: 116 / 202

S H A R E D S E R V E R D R I V E S A N D N E T W O R K D E V I C E S
Overview
98 | User Manual (v1.0.0.1)
8
You can use the S: drive as you would any other disk drive on your PC.
Note:
The Smart Home Server’s hard disk is also used to store backup
files. Therefore, the more files stored on the S: drive, the less
space available for backups.
U S B P O R T S
You can connect external storage devices (such as hard drives and flash
drives) and printers to the two USB ports on the back of the Smart Home
Server. You can connect two storage devices, two printers or one of
each. You can connect devices supporting either USB 2.0 or USB 1.1.
Error:
System Failed to Map to S: Drive on <PC Name>
If you already have an S: drive on your PC, an Alert Box will pop
up when you log into the Command Center and tell you that the
system failed to map the Sereniti Shared Drive to the S: drive. To
allow the system to map the Sereniti Shared Drive to the S: drive,
you have to remap your existing S: drive to another letter. To do
this:
1. Close the Command Center.
2. Open the Windows Explorer.
3. Click
Tools and select Map Network Drive .
4. In the Drive field, click the drop-down list and select an unused
letter.
5. In the Folder field, click Browse and select the folder currently
mapped to the S: drive.
6. Click Finish . This maps the folder to the drive letter you
selected in Step 4.
7. Right-click the S: drive and select Disconnect . This unmaps the
drive from the old letter.
8. Open the Command Center. The drive should now map properly.