Sereniti SHS-2000, User Manual

Page: 131 / 202

F O L D E R A N D P R I N T E R S H A R I N G
Folder Sharing
Sereniti Smart Home Networking Service | 113
3
Click SUBMIT .
Change the PC’s workgroup To change a PC’s workgroup:
1
Click Start on the Windows taskbar, right-click My Computer and
select Properties . The System Properties window appears.
2
Click the Computer Name tab. The workgroup name is shown in the
middle of the window.
3
To change the workgroup name, click Change , enter a new workgroup
in the Workgroup field, and click OK twice to save the new workgroup
and close the System Properties window.
4
When instructed, restart your PC for the new workgroup to take effect.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F O L D E R S H A R I N G
To create a shared folder and, if necessary, unshare it, you must be using
the PC on which the folder is saved. To access a shared folder, you can
be using any PC that is logged into the network.
C R E A T E A S H A R E D F O L D E R
To share a folder so that other users can access it from their PCs, follow
the steps below:
1
Click Sharing and then click the Folder Sharing icon to display the
Folder Sharing page (
FIGURE 9-1
). This page shows each PC in your
network and the shared folders on each PC. For each shared folder, it
gives the share name and the full path to the folder.