Sequoia LISST-100X, User Manual

Page: 139 / 144

LISST-100X User’s Guide 127
Small Volume Flow-Through Chamber
Reduces the optical path length to 1 cm for
higher maximum concentrations. Optimized for
pumped flow through applications and seals on
optics of standard 5 cm path instruments only.
When combined with your own pump and stirred
sample container the Small Volume Flow
Through Chamber allows the submersible
LISST-100/-100X to be used as a laboratory
particle size analyzer.
Path Reduction Modules
The Optical Path Reduction Modules (PRM) are
used with the LISST-100/-100X and LISST-ST/-
STX to reduce the optical path in the field,
thereby increasing the maximum sediment
concentration that can be measured, without the
need for permanent optical pathreductions.
PRMs are available to reduce the optical path by
50, 80, and 90%.
Large Volume Test Chamber
Horizontal acrylic chamber with O-ring and drain
valve. Ideal for doing background
measurements (zscats) with a PRM in place.
Clamps
2-piece or 1-piece clamps for easy mounting of
the LISST-100/-100X to a frame or simply to a
wire for stand-alone profiling.
One set of
clamps ships as standard with the LISST-
100X.
Sold as set of 2 complete clamps only.
LISST-100X Replacement Batteries
Battery packs for the LISST-100X / LISST-STX
with 18 alkaline batteries assembled into a
custom battery pack to provide the +9 and -9V
required. The battery pack is
not rechargeable.
One battery pack ships as standard with the
LISST-100X.
NOTE: The LISST-100X/-STX battery pack
CANNOT be used with the LISST-100/-ST
instruments.