Sequoia LISST-100X, User Manual

Page: 125 / 144

LISST-100X User’s Guide 113
Appendix E: Software Upgrade Installation Procedure
The following procedure describes the installation of the LISST-SOP Version 5.00 software
for users who have previously used Version 4.65 together with their LISST-100X.
NOTE THAT VERSION 5.0 DOES NOT SUPPORT COMMUNCATION WITH THE LISST-
100; ONLY WITH THE LISST-100X.
YOU MUST USE VERSION 4.65 (Windows XP compatible only) TO COMMUNICATE WITH
AND PROGRAM A LISST-100.
Download Install
file
The LISST-SOP Version 5.00 is available from the Sequoia Scientific
web site (
http://www.sequoiasci.com/library/downloads/login.aspx ) and
is included on a USB card with new instruments. The file downloads
are restricted to registered web-site users only. You can register for
download by filling out the form on the website. Future visits to the
download page can be accessed by entering the email and password
selected at the time of registration. Choose the .zip file labeled “LISST-
100X SOP Ver 5 RELEASE - FULL INSTALLER”. Save this file to your
disk.
Unzip and
replace files Unzip the file to a temporary folder on your hard drive, and then
REPLACE the following 4 (four) files with the files you already have on
your PC:

Factory_zsc_2002.asc - replace with the
Factory_zsc_SNSN.asc file that you already have, where SNSN
is the instrument serial number.

InstrumentData.txt - replace with the InstrumentData.txt file that
you already have. In version 4.65, the InstrumentData.txt file is
located in C:\Program Files\Sequoia

Lisst.ini - replace with the Lisst.ini file that you already have. In
version 4.65, the Lisst.ini file is located in C:\Windows

Ringarea_2002.asc - replace with the ringarea_SNSN.asc file
that you already have, where SNSN is the instrument serial
number.
Rename old SOP
folder
Rename your old folder C:\Program Files\Sequoia\LISST100 to
something else, e.g. C:\Program Files\Sequoia\Ver465Files
Run
SetupSOPv5.exe
and configure
software
When you have replaced the 4 files above with the files from your PC
or ship disk, run the SetupSOPv5.exe installer. A Welcome screen will
appear. Choose
Next to continue to the Destination Directory screen.
The directory for the installation of SOP 5.0 is
C:\Program
Files\Sequoia\LISST100 or C:\Program Files (x86)\Sequoia\LISST100 .